To define the Company’s environmental and sustainability policy.
1 General Policy
- Beam is a company specialising in sales, calibration, hire and repair of electrical test equipment and associated products. The Company is aware that its operations can have an impact on the environment and is therefore committed to the continual improvement and periodic review in its environmental performance, incorporating the following:
- Complying with legislative and ethical standards concerning care of the environment and the prevention of pollution.
- Working with suppliers and sourcing products with low environmental impact and consider options to reduce packaging on products whenever possible.
- To reduce our consumption of energy and waste, including the reduction and reuse of packaging material and office paper.
- To reduce the impact of vehicle emissions through the continual review of its delivery and sales network via commercial vehicles and company cars.
- To manage the waste it generates using the best practical environmental option through reuse, recycling and recovery.
- To encourage employees on company business to car share, make use of public transport and conference calling where practicable and appropriate.
- The contents of this policy are communicated to the Company’s staff and is displayed on the notice board.
- Copies of any relevant documentation are made available upon request.
- Minimising negative impact on global and local environment, community, society, and economy.
- Integrating sustainability considerations into our business decisions.
- Identifying, controlling and disposing of products that have special handling and waste treatment needs.
- The Director of Operations Development is responsible on behalf of the Company for monitoring requirements for environmental regulatory compliance through audit and for communicating these requirements for action within the Company.
- The policy will be reviewed by the Company’s Directors and updated annually.
2 Waste And Resource Management
2.1 The Company manages the waste it generates using the best practical environmental options through reuse, recycling and recovery. Contracts are in place to recycle card, plastic, office paper and wood. Tubes and lamps are recycled and a take back scheme operates at a local level for tubes and lamps returned by customers, as well as portable batteries.
3 Energy And Water Treatment
3.1 The Company encourages regular reviews to reduce the consumption of energy and water in all its premises and continually considers options for energy efficiency including the following:
- Installation of LED lighting.
- Use of occupancy detectors, time lag switches and push taps.
- Voltage optimisation.
3.2 The Company gives consideration to energy and resource management options at the design stage for new buildings and on refurbishment projects, with an emphasis on minimum standard specifications for low-energy technologies.
4 Transport And Travel
4.1 The Company seeks to reduce the impact of vehicle emissions by ensuring they are well maintained. It is encouraged that any light commercial delivery vehicles are fitted with stop/start technology and comply with the Euro 5 emissions standard.
4.2 The Company actively encourages the reduction of CO2 emissions through the company car lists, which are reviewed and updated quarterly, by the purchasing of fuel- efficient vehicles and has recently introduced hybrid and electric vehicles to the fleet.
5.1 The Company invests in its employees and provides training to meet its objectives of efficiency and service to customers and suppliers.
5.2 The Company plays an active role in the communities it operates in, and is an active supporter of industry organisations, charities and the arts.
Aims and Objectives
- Conduct audits and annual reviews to ensure compliance with legislation regarding Waste Management and Packaging.
- The Chief Operating Officers / Managing Directors and Managers consider the packaging when presented with new products.
- Develop a monitoring system to help manage and reduce our environmental impact.
- Key and new suppliers are requested to provide a statement of compliance to the Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment (EEE) Directive (2011/65/EU).
- Where a product is sourced outside of the EU, a statement of compliance to RoHS is also required and will be maintained with the goods received paperwork.
- Beam standard terms and conditions of purchase require compliance to RoHS where appropriate.
- All EU suppliers are required to comply with the CE marking regulations and declarations of conformity are available on request. Where goods are purchased outside of the EU a Certificate of Conformity is requested with each order.
CPR – Construction Products Regulations
- All products supplied in relation to the CPR are compliant in every respect and marked in such a way as to readily ensure our compliance with the CPR and upon re-sale of such products to our customers.
- Beam is both a “distributor” and a “producer” of WEEE. As a distributor under the WEEE regulations, we always provide the designated information to customers.Every year the UK throws away around 2 million tonnes of WEEE. If this waste is not disposed of correctly, there could be potential harm to health and the environment.
- To ensure safe treatment and to increase re-use and recycling of material we offer a take back scheme for any waste electrical product. For account holders who are the end user of the product this like for like (old for new) service is free.
- As a producer, Beam has joined the WEEE Link Producers Scheme and has been issued with the WEEE producer number WEE/GF4998UZ.
- All faulty products returned to Beam are returned back to the manufacturer for appropriate disposal.
- Some products which have reached their end of life are disposed of through manufacturer channels or a registered waste disposal company. Information regarding the appropriate disposal method is communicated via the material data sheet supplied with the product or on the packaging or can be obtained from the supplier on request.
All Beam Locations are permitted and licensed to accept hazardous waste that falls within the scope of the WEEE Regulations